Zoom

Photos are for illustration purpose only!

HFR-1055

Availability: 1 pcs.

Soft Starter

55kW, AC 380V, 3-Phase

A compact and complete solution to reduce starting torque and current to minimize mechanical stresses and peak currents in an industrial motor application.

HFR1000 Technical Manual
Software for Soft Starters
HFR1000 Cerificate of Conformity
€900.00

SKU: STA006

Prices are wholesale, without VAT
and are subject to change without notice!

Details

General technical specification for val_pn soft starter
Main Features
Startup mode1. Current limiting startup: low down the start voltagelimit the start current by keypad settingrandom adjusting.
2. Voltage ramp startup: smooth start for motor, reduce the concussion of electric network by start current.
3. Kick startup
Stop mode1. Free stop 2. Soft stop
Control modeKeypad control, Terminal control, Modbus control
System control function1. The outputinput connect point can be the programmable point, internal intelligentized programs can check the status of drive-system.
2. Standard internal port (MODBUS) can realize PC/PLC control.
3. LED display, operator can set all the parameter program by keypad control.
4. Keypad control remote control.
5. Delay relay output function
6. Malfunction output relay function
7. One soft starter control more than one motor.
System protection function1. Over current protection
2. Over load protection
3. Out phase protection
4. Over heat protection
CommunicationMODBUS
Fault functions1. Fault Diagnosis
2. The fault can be displayed or relay output can be used
Technical Parameters
3-Phase power supplyAC 380V±20%, 50Hz
Nominal current30A~630A
Motor power15~315KW (380V)
Startup modeVoltage ramp startup (1120 seconds, adjustable);
Current limiting startup (150~400%, adjustable);
Voltage kick startup
Stop modeFree stop; soft stop (160seconds , adjustable)
Relay outputDelay running output; fault output; full voltage output (by pass) [contact dot: 5A, 250VAC]
Protection functionPhase loss of input, over-load, short circuit, over-heating, and etc.
Safety degreeIP20
Cooling modeCooling naturally
Environment conditionsEnvironment temperature: -10°C~+50°C
Relative humidity: ≤95%(20°±5°)
Free from flammable gas, explosive gas and corrosive gas, free from electric dust, to be installed indoors with good ventilation
Vibration below 0.5G
If the altitude is above 2000m, the capacity should be decreased accordingly for application.

Mounting Sizes (mm)
Aval_1
Bval_2
Cval_3
Eval_4
Fval_5
Hole Diaval_6

Main Features

SKUSTA006
SupplierEURA DRIVES
Product SeriesHFR1000
Power55kW
Current110A
Voltage380V
Input Phase3-Phase
Protection RatingIP20
CommunicationsRS485
Dimensions (H x W x D)250mm x 153mm x 162mm
CSV Data250,153,162,219,140,Φ6#hfr1000-mounting-sizes-a.jpg

Additional Information

Thera are no additional information for this product.